(S)-3-AMINO-1,2-DIHYDROXYPROPANE ISOPROPYLIDENE ACETAL - Names and Identifiers
(S)-3-AMINO-1,2-DIHYDROXYPROPANE ISOPROPYLIDENE ACETAL - Physico-chemical Properties
Molecular Formula | C6H13NO2
|
Molar Mass | 131.17 |
Density | 1.012 |
Boling Point | 147-148°C/14mm |
Storage Condition | under inert gas (nitrogen or Argon) at 2–8 °C |
(S)-3-AMINO-1,2-DIHYDROXYPROPANE ISOPROPYLIDENE ACETAL - Risk and Safety
Hazard Symbols | Xn - Harmful
|
Risk Codes | R22 - Harmful if swallowed
R37/38 - Irritating to respiratory system and skin.
R41 - Risk of serious damage to eyes
R43 - May cause sensitization by skin contact
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
(S)-3-AMINO-1,2-DIHYDROXYPROPANE ISOPROPYLIDENE ACETAL - Upstream Downstream Industry
Raw Materials | 1H-Isoindole-1,3(2H)-dione, 2-[(2,2-dimethyl-1,3-dioxolan-4-yl)methyl]- (S)-2,2-DIMETHYL-1,3-DIOXOLANE-4-ACETAMIDE 1,3-Dioxolane-4-methanamine, 2,2-dimethyl-N-(phenylmethyl)-, (4S)- (R)-O-ISOPROPYLIDENE GLYCEROL MESYLATE 2,2-DIMETHYL-4(R)-4-IODOMETHYL-1,3-DIOXALANE (S)-(+)-2,2-Dimethyl-1,3-dioxolane-4-methanol (R)-(-)-2,2-DIMETHYL-1,3-DIOXOLAN-4-YLMETHYL P-TOLUENESULFONATE (R)-(+)-2,2-Dimethyl-1,3-dioxolane-4-carboxaldehyde 1,2:5,6-Bis-O-(1-methylethylidene)-D-mannitol 2,2-Dimethoxypropane
|
Downstream Products | (R)-(-)-3-Chloro-1,2-propanediol
|
(S)-3-AMINO-1,2-DIHYDROXYPROPANE ISOPROPYLIDENE ACETAL - Introduction
(S)-( )-(2,2-dimer-[1,3]-DIOXOLAN-4-YL)-METHYLAMINE is an organic compound with the following chemical structure:
Its properties and uses are as follows:
-Appearance: Colorless liquid.
-Melting point:-40 ° C.
-Boiling point: 85-86 ° C.
-Density: 0.86g/cm³.
-Solubility: Soluble in ether, alcohol and Ketone solvents, slightly soluble in water.
-Vapor pressure: 15mm Hg(20 ° C).
-the optical rotation of light: with left-handed.
This compound is commonly used as a catalyst or ligand in organic synthesis reactions, and can also be used in the synthesis of hormones, biologically active compounds, etc. It has important applications in enantioselective synthesis and can be used to generate chiral molecules.
The preparation method is mainly carried out through the following steps:
1. The reaction of BIS (2,2-dimethyl-[1,3]-dioxopentyl) methyl lithium and boron trichloride generates an intermediate.
2. By adding methylamine hydrochloride under acidic conditions, and then carrying out deprotection reaction to obtain the final product.
When using or handling (S)-( )-(2,2-dimer-[1,3]-DIOXOLAN-4-YL)-METHYLAMINE, note the following safety information:
-Avoid contact with skin, eyes and mucous membranes. In case of contact, rinse immediately with plenty of water.
-Maintain a well-ventilated laboratory environment during use.
-Storage should be sealed to avoid direct sunlight and high temperature.
-If necessary, wear appropriate safety gloves and goggles to avoid inhaling vapors.
-When handling this compound, the relevant safety procedures should be followed.
Last Update:2024-04-09 02:00:51